4 Reasons to Opt for Submersible Winding Wire

The difference between enameled aluminum wire and enameled copper wire of vibration motor: the resistivity of copper wire is 0.017, and the resistivity of aluminum wire is 0.028. The cross-sectional ratio of copper wire and aluminum wire interchange is 0.79:1, and six square copper wires are equivalent to ten square aluminum wires. The diameter of the aluminum wire is thicker than that of the copper wire, and the same aluminum wire of the stator slot will not fit.

Compared with general round wires, flat enameled wires have the following advantages:
Higher floor area ratio and better use of space: The high conductor density enables coils and components of the same size to achieve higher efficiency, save materials and reduce costs.

Standards Of Enameled Wire includes
1）IEC 60317 for Europe
2）JIS C3202 for Asia
3）NEMA MW 1000C (inch) or NEMA MW 1000C metric (mm) for North America

Enameled aluminum wire ,High resistance to heat shock, high temperature and good performace at softening breakdown, suitable for high-speed automated routing, able to be direct weld, with no pinhole, resistive to high frequency, wearing, refrigerants and electronics corona, high breakdown voltage

1060 Transformer Aluminum Strip Product Description:
060 transformer aluminum belt is a special purpose aluminum belt product produced for transformers. It uses high-purity aluminum substrate and aluminum deep-processed products formed by slitting aluminum coils with an aluminum content of more than 99.60%. The raw material of transformer aluminum strip is high-purity aluminum, which is rolled into thin sheet aluminum coils of different thicknesses and widths by a cold rolling mill, and then longitudinally slitted into aluminum strips of different widths by a slitting machine according to the application. It is an important raw material in industry. The main processing equipment of 1060 transformer aluminum strip is slitting unit, which can be divided into required length and width according to needs. Usually the transformer aluminum strip is slit according to the actual needs of the user, which can reduce waste, reduce processing procedures (without cutting), and save raw material costs.

The paper covered wire is a type of enameled wire that is extruded or pulled by an oxygen-free copper rod or an electrical circular aluminum rod, and then annealing the wire, and then winding two layers or two layers of insulating on the copper (aluminum) conductor.Paper (including telephone paper, cable paper, high voltage cable paper, turns], suitable for oil immersion transformer coils and other similar electrical windings.Electrical bare copper (aluminum) wires produced by extrusion process are the most ideal materials for the production of cable paper wraps.

Nomex covering corresponds to class H insulation is mainly used in the construction of condensers and capacitors. Main application of it is in shielding of cables in high temp. environments (200¡ãC) such as dry type transformers, military and aerospace cables. Nomex covered conductors are more effective in condition where temperature resistance and dielectric strength requirements are high.
Application of Nomex Paper Covered Aluminum wire :
Mobile Transformer,Traction Transfomers,Pole-mounted distribution transformers,Power substantions,rectifiers,oil-immersed transfomer coil winding.

Enameled wire motors, electrical appliances, home appliances, communications, electronic information, instrumentation, power tools, automobiles and other industries provide supporting basic material industries. They are the main and key raw materials for electromagnetic windings of motors and electronic instruments. The rapid development of electronic products, etc., has brought a broader application field and market to enameled wires, but at the same time, higher requirements have been put forward for enameled wires, and enameled wires have continued to develop towards a high level and high quality.

Precautions for storage should be well packaged, should not be placed in a high-humidity warehouse, should not be exposed to direct sunlight, and should not be placed near acids, alkalis and organic solvents.

Enameled wire is the most widely used electromagnetic wire in the production of low-voltage products. A key performance requirement of this electromagnetic wire is the continuity of the paint film, which is to check the number of pinholes in the paint film under a certain length. When checking the number of pinholes, use a professional paint film continuity tester. The fewer the number of pinholes, the better the paint film integrity of the magnet wire.

Best Price Factory Sale Enameled Copper Coated Aluminum Wire can be used at a working temperature of 180 ClassC. The product has the advantages of direct solderability, good coloring, and low dielectric loss under high frequency. Widely used in windings and wiring of motors, electrical appliances, electronic components, meters, etc.

List 5 type of enameled wire characteristics
Acetal enameled wire
Polyurethane enameled wire
Polyester and modified polyester enameled wire
Polyesterimide/polyamide imide composite enameled wire
Polyesterimide/polyamide composite enameled wire

Copper Magnet Wire Manufacturing Process includes important three steps – enameling, winding and Inorganic insulated wires. Mainly introduce the method to ensure the quality of copper enameled wire.

Silver plated copper wire is manufacture with the combination of silver and copper and Silver Plated Copper Electrical Wire is manufactured using grade copper and silver; the industrial standards are always kept into the consideration.

The multi-shaped enamel wire refers to a metal wire for winding electromagnetic coils with an insulating paint, also known as electromagnetic wires. The multi-shaped enameled wire is the primary raw material of electrical, motor and household appliances, telecommunications, electronic external electromagnetic windings. In the future, follow the rapid development of industrial appliances, household appliances, telecommunications, electronic products, etc. Market and application fields.

1. Acetal enamel wire.
2. Polyester enameled wire
3.Pu enamel wire.
4.Polyester iminelin wire
5.Polyimide enameled wire
6. Polyamide imide enameled wire

Three-layer insulated wire structure
High-frequency transformer triple-insulated wire is a high-performance insulated wire, so as the name suggests, this wire has three insulation layers with a core wire in the middle.
The first layer The first layer is golden yellow polyamine film, its thickness is a few microns, but it can withstand 3KV pulse high voltage
The second layer is a spray paint coating with high insulation,
The third layer is a transparent glass fiber layer. The total thickness of the insulating layer is only 20-100um. Its advantage is high insulation strength, and any two layers can withstand a safe voltage of 3000V AC, and the current density is large.

3M paper covered aluminium wire feature :
* High dielectric strength/Excellent therm alstability/Wrapped tightly;
* Paper covered Aluminum wire is a special kind of magnet wires. Its conductors is electrical round aluminum rods which squeeze
and draw by the certain size of mold. And its insulations is special material;
* Our 3M paper covered aluminum wire uses two layers or several layers as the insulation layer;
* The wrapping direction of paper is same. And every layer paper twines conductors continually and compactly without wrinkles;
* Uses for oil-immersed transformers, reactors and other windings;

The wrapped wire is made of natural silk, polyester fiber, glass fiber, insulating paper or synthetic resin film, etc., tightly wrapped on the conductive wire core to form an insulating layer. There are also insulating layers wrapped around the enameled wire. In addition to thin-film insulation, others such as glass filaments need to be dipped in adhesive insulating varnish to improve their electrical, mechanical and moisture-proof properties. In fact, they are combined insulation.

These Paper wrapped insulated aluminium wires enamelled and Strips are made from very high quality raw material which ensures hassle free work performance at its user end. These Paper Covered Aluminum Wires and Strips are technologically advanced and confirm to industrial quality norms of international standard. These Paper Covered Aluminum Wires and Strips are widely finds its applications in various industrial sectors.

Application:1. High-frequency transformers, ordinary transformers; 2. Inductances, electromagnetic coils; 3. Motors, including household motors, various micro motors, compressors and other motors with high environmental requirements; 4. Special electromagnetics for audio coils and optical drives Wire; 5. Electromagnetic wire for display deflection coil; 6. Electromagnetic wire for degaussing coil;

Paper-covered Aluminium magnet wire deliver excellent performance when used with oil such as transformer oil. A paper with a small hygroscopicity, mechanical strength, good permeability for oil, and high dielectric strength should be selected.

Application of Telephone cable paper covered insulated Aluminum magnet wire strip:
Paper covered Aluminum magnet wire is used in oil-immersed transformer and other similar electrical coil windings.

Springiness of Round Enameled Wire is one of important performance in accordance with the IEC standards to ensure the quality of Round Enameled Wire. How to improve the performance, the article introduce how to operate the enameling machine, during the manufacturing process of enameled wire, the worker shoule be focus on some points.

Resistance:
Take 1m of the enameled wire to be inspected, scrape off the paint film at both ends, measure the resistance of the enameled wire, the resistance measurement value should be within the resistance range of GB/T6109; the standard temperature is 20 degrees, the conversion formula: 20 degrees resistance/234.5+standard Temperature = actual measured resistance/234.5 + measured temperature;

1. Cutting
The enameled wire is composed of a conductor and an insulator, and the hardness of the two parts is very soft, so it can be cut by using a TabCUT-200 precision cutting machine with a general SiC cutting chip. Since the insulator is coated on the conductor, and its hardness and ductility are quite different, and the insulating layer has a certain degree of peeling, it is better to use some soft materials such as tin foil, rubber, etc. to wrap the cutting part when cutting. Up to prevent the insulation layer at the fracture from peeling off after cutting.

Thermal Class 105 / 133 / 155 Grade Enameled Wire includes
Polyethylene formaldehyde enameled copper wire (PVF)
Polyester enameled copper wire (PEW)
Polyurethane enameled copper wire (UEW).
Application: Normally used for Oil-filled transformers, motors, micro motors, transformers and high frequency coils, relays, magnetized coils

In recent years, the price of electrolytic copper has continued to rise, which has brought a huge impact to the production of related copper wire raw materials and enameled wire suppliers. The use of copper-clad aluminum enameled wire has been proved by users to replace pure copper enameled wire, thus providing a huge business opportunity and a broad market for the development of my country’s enameled wire industry. The new type of Enameled Copper Coated Aluminum Magnet Wire For Voice Winding using copper clad aluminum material as the inner conductor has characteristics between copper and aluminum, combining the excellent conductivity of copper and the light weight of aluminum.

1. Conductor resistance ¡ª The resistance of a conductor is proportional to its length and inversely proportional to its cross-sectional area.
2. Conductivity¡ªBased on the resistance 1/58ohm (0.017241 ohm) of a standard soft copper wire with a length of 1m and a cross-sectional area of 1mm2 at 20¡æ, it is called 100% conductivity. The greater the resistance, the lower the conductivity, and the two are inversely proportional.
3. Bending resistance¡ªfix one end of the single wire, add weight to the other end to make it vertically downward, and then bend it back and forth 180 times until the wire breaks. The more bending times, the stronger the bending resistance.
4. Tensile breaking force¡ªthe maximum load weight or force applied to the specimen to break it during a tensile test.
5. Tensile strength¡ªthe breaking force per unit area to bear when the sample is broken during the tensile test.
6. Elongation ¡ª the ratio of the length of the sample after being stretched until it breaks to the original length at the specified standard distance. Conductors have different impedances at different temperatures.
Generally, 20¡ãC or 25¡ãC is the standard. The higher the temperature, the greater the impedance.

The winding is the key component of the electric motor for electromagnetic energy conversion and transmission, so as to realize the conversion of electrical energy into mechanical energy. The winding is the most important part of the motor, and the choice of Enameled Copper/Aluminum Wire For Motor is also very important

Brand Name: LP Magnet Wire
Certification: UL,SGS,RoHS,ISO9001
Conductor Material: copper or aluminum
Bobbin: 30kg/50kg/150kg wooden spool
Diameter: round:2.0-7.0; flat:a:1-10,b:3-35
Model Number: Paper Coated Copper Wire