QB-2/130 thick paint film polyurethane enamelled round copper wire

Pin hole test is to find insulation defects after treatment with a salt water solution.
A wire specimen approximately 1,5 m in length is taken for conductors of nominal diameter less than 0,07 mm, and pproximately 6 m in length for conductors of nominal diameter equal to 0,07 mm or more.

EIW Polyesterimide Enamelled Copper Wire Characteristic:
High heat resistance and excellent chemical resistance
(1) Good film adhesion, heat resistance and chemical resistance
(2) Good insulation properties and dood thermostability under 150oC working environment, good resistance to abrasion and solvent

IEC Standard High Thermal Class 180 200 220 Enameled Copper Round Wire
Straight welding modified polyurethane enameled copper wire (SEIW)
Polyesterimide enameled copper wire (EIW)
Amide-imide coated polyester enameled copper wire (EAIW)
Polyimide enamelled copper (AIW)
Used for High-voltage coils, relays, transformers, hand machine motors, electronic coils, Motors, steam coils, dry-type transformers, hand tool armatures, cold coal compressors, etc.

Kapton Insulated Copper Wire For Oil Immersed Transformer has heat resistance, excellent chemical stability, high temperature resistance, toughness, abrasion resistance, flame retardancy, electrical insulation, etc.
Kapton Insulated Copper Wire can be used as enameled wire paint, motor winding impregnating paint, etc. It is of great significance to the electrical industry. Enameled wire is an important material for small and medium-sized motors and electrical equipment. At present, the requirements for heat resistance and thermal stability of enameled wire insulation are particularly high. Because electrical equipment needs to operate at high temperatures. Improve the reliability of overload and increase the unit power of electrical equipment. The application of polyimide in this area can significantly improve the insulation capacity of the motor.

Ultra Thin Enamel Copper Magnet Wire Insulated Winding Wire is an enameled wire with a guide body diameter of less than 0.05mm. In our company, it refers to the fine enameled wire produced by single-head or double-head enameling machine.
Specification range: 0.018-0.05mm
Varieties: UEW, EIW(S), EI/AIW, AIW, PIW, SBUEW
Thermal level: 130,155,180,200,220,240

Brand Name: LP Magnet Wire
Delivery time: 7-30 Days
Conductor Material: Copper
Thermal Class: 180-220C
Model Number: 0.012 – 0.8mm self bonding wire

There is ‘copperweld’ wire which is an iron core for more strength coated with copper for lower resistance than the iron. This is preferred for antennas for its strength. Purer copper wire will break more often, HOWEVER, I had a really pure (Oxygen free), bare copper wire up for about 5-6 years before it broke, and one with thick plastic insulation for 8-10 years, so it is hard to predict.

Copper Magnet Wire Manufacturing Process includes important three steps – enameling, winding and Inorganic insulated wires. Mainly introduce the method to ensure the quality of copper enameled wire.

Type: insulated
Brand Name: LP
Thermal Class: 130-220C
Standard: IEC, NEMA,GB
Delivery time: 10-30 days
Size: a:0.1-0.6;b:0.2-6.0mm
Conductor Material: Copper

Shape: Round
Brand Name: LP
Conductor Type: Solid
Delivery time: 7-30days
Size: 0.025mm-4.5mm
Thermal Class: 130-220C

Conductor Type: Solid
Standard: GB IEC JIS NEMA
Brand Name: LP Magnet Wire
Application: transformer,motor,generator
Thermal Class: 105 °C 120 °C 140 °C 155 °C 180 °C 200 °C 220 °C 240 °C

The raw materials are pure copper cathodes grade “A” London Metal Exchange Registered Brand with copper purity of 99.99%. This allows our high quality copper busbar and rod to meet International Standards.
1.Volume Resistivity at 20°C/ 68°F 1.7241-1.7070 μΩcm
2.Volume Conductivity at 20°C/ 68°F 58.00-58.58 MS/m
3.Density 8.91 g/cm3
4.Melting Point 1083 °C
5.Excellent Corrosion Resistance

Product Name£º14 awg enameled copper wire
Type: round and rectangular copper wire
Round Dimension:14awg
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

New energy vehicles use a variety of electrical components, such as electric motors, batteries, and inverters, that require enameled copper wire.

Conductor Type: Solid
Conductor Material: Copper
Standard: IEC,NEMA,GB,JIS
Brand Name: LP Magnet Wire
Temperature class: 130,155,180,200,220

5 method to choos the enameled copper wire, like price, voltage, stability and other performance, also can do an experiment to sure the characteristic.

Type: insulated
Thermal Class: 130-220C
Delivery time: 7~20 days
Standard: GB IEC JIS NEMA
Brand Name: LP Magnet Wire

Rectangular Bar
Width 9.53 mm. up to 305 mm.
Thickness 2.5 mm. up to 100 mm.
Volume Resistivity at 20°C/ 68°F 1.7241-1.7070 μΩcm
Volume Conductivity at 20°C/ 68°F 58.00-58.58 MS/m
Density 8.91 g/cm3
Melting Point 1083 °C
Excellent Corrosion Resistance

Introduction
200-grade thick varnished polyester yam polyamide-imide composite enameled rectangular copper wire (Q(ZY/XY)B-2/200), which belongs to the enameled wire under the winding wire classification.

Model and name
Q(ZY/XY)B-2/200, 200-grade thick varnished polyester-polyamide-imide polyamide-imide composite enameled rectangular copper wire.

Conductor Type: Solid
Conductor Material: Copper
Bobbin: PT-4–PT-200
Standard: IEC,NEMA,GB,JIS
Certification: SGS,UL,ISO9001,ISO4001
Product name: Enameled Copper Wire

Thermal Class: 130-220c
Delivery time: 7-30 days
Centification: SGS,UL,RoHS,ISO9001
Standard: GB,IEC,NEMA,JIS
Brand Name: LP magnet wire
Bobbin: PT-4–PT-200

Product Name£ºawg 42 enamled winding wire
Type: round and rectangular copper wire
Round Dimension:awg 42
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

0.025-4.5mm Super Enameled Copper Wire In Phuket With Factory Price
Mechanical properties: including elongation, rebound angle, softness and adhesion, scratching, tensile strength and other items.
Heat resistance: including thermal shock and softening breakdown test.
Electrical properties include: breakdown voltage, paint film continuity and DC resistance test.
Chemical resistance includes solvent resistance and direct solderability.

Delivery time: 7-30 Days
Brand Name: LP Magnet Wire
Thermal Class: 130-220C
Standard: IEC,NEMA,GB,JIS
Bobbin: 30kg/50kgWooden Spool
Model Number: PE Insulated Enameled Copper Wire

Why is Enameled Copper Wire Widely Used? Most of equipment of our lives need the generator, transformer, mobile, computer, etc. All of the machine need the winding coil which need the copper magnet wire or aluminum enameled wire. So the enameled wire is important for life.

Brand Name: LP Magnet Wire
Thermal Class: 130-220C
Standard: IEC,NEMA,GB,JIS
Bobbin: 30kg/50kgWooden Spool
Delivery time: 7-30 Days
Insulation: PEW, PIW, EIW, AIW, EI/AIW

Thermal Class: 130-220C
Delivery time: 7-30 Days
Brand Name: LP Magnet Wire
Diameter: 0.025mm–4.6mm
Certification: SGS,UL,ISO9001,ISO4001
Insulation: PEW, PIW, EIW, AIW, EI/AIW

Product Name£ºenamelled copper winding wire 2uew
Type: round and rectangular copper wire
Round Dimension: 2uew
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

Product Name£ºcilling fan winding wire 36 swg copper
Type: round and rectangular copper wire
Round Dimension:36swg
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

Conductor Type: Solid
Delivery time: 7days-30days
Brand Name: LP magnet wire
Standard: IEC, NEMA,GB,JIS
Certification: SGS,UL,ISO,ROHS
Size: a: 1-10mm b:3-35mm