Paper Covered Enameled Shaped Aluminum Wire

Flat wire thickness (a): 0.8mm ~8.0mm
Flat wire width (b): 2.0 ~ 25mm
Width (b) /thickness (a) ratio: 1.4 ＜ b/a＜8.0
Enameled flat aluminum wire available size ranges from 1.6-200 mm².

Aluminum is not only cheaper than copper, but also as an excellent conductor, it has better flexibility than copper, its density is only 1/3 of copper, and the same weight of aluminum conducts electricity twice as much as copper; therefore, aluminum Wire requires a larger wire gauge than copper wire to conduct the same current.
Compared with copper, another advantage of enameled round aluminum wire is that the NEMA standard recognizes aluminum wire as a higher thermal enameled wire. For example, replacing copper wires with aluminum wires, using high-temperature polyester TeresterR@ C966, and composite polyamide-imide topcoat, the thermal level can be increased from 200 to .220. The reason is that during the aging experiment of the enameled copper wire, the catalysis of copper ions promotes the aging of the paint film.

Standard Size Range Round Type Enameled 0.50 mm Aluminum Wire is sometimes used in large transformers and motors, but due to its low conductivity, the cross-sectional area of aluminum enameled wire must be 1.6 times that of copper wire in order to obtain comparable DC resistance. Magnet wires with a smaller diameter usually have a circular cross-section. Thicker aluminum magnet wires are usually square or rectangular (with rounded corners) to allow more efficient use of the available winding space.

This round enameled wire is made of pure aluminum with insulation,conductors with temperature Class B, F, H, 200˚C, 220˚C are being manufactured by us.
Diameter: 0.16mm to 8.0mm
Standard: IEC60317, NEMA MW 1000

The winding wire is a conductive metal wire with insulation layer, used forwinding a coil or winding in electrical products , which’s usage is to produce the magnetic field by current, or cutting lines to generate theinduction current, conversion between electricity and magnetism, so it is also called electromagnetic wire(magnet wire) .

1)Product Name: Aluminum Enameled Wire
2)Diameter:0.5mm/1.0mm/1.5mm
3)Insulation Properties:Polyester imide enameled wire
4)Use:DIY,transformer,electromagnet
5)Work Temperature:-25¡æ~180¡æ
6)Work Humidity:5%~95%RH

High Voltage Winding Wire Transformer Enameled Flat Aluminum Wire 2-22.5mm is a aluminum wire mainly used for windings with contiguous turns. Enamel is in fact a very resistant insulator mechanically, thermally and electrically. In addition to ordinary enamel there is solderable polyurethane enamel which is suitable for very large diameter wires (from 0.16 mm) very difficult to mechanically pickle. Pickling occurs around 400-500 ¡ã C.

LP Industry produce awg and swg 0.2-10.0mm round aluminum wire, used for transformer, generator, motor, submersible motors, etc. the aluminum winding wire is composed of aluminum conductor and inuslation materials.

China Manufacturers Enamelled Aluminum Electric Submersible Winding Wires is used in the manufacture of submersible motor windings. Submersible motors are mostly used for oil extraction in oil mines and work at high temperatures. In order to maintain the internal and external pressure balance, the interior including the windings are immersed in high-pressure (for example, 10 MPa) water-containing oil. In order to avoid joints, the windings are mostly made of a single magnet wire repeatedly wound in the slot of the motor, so the insulation layer is required to have good wear resistance. Usually polyimide film is used to wrap the covered wire.

Enamelled round aluminum wire is mainly used as an electrical conductor wherever coils are in motion.It’s available size in diameters from 0.20mm to 9.2mm(SWG1-36,AWG1-32) with different insulation, such as Polyurethane, Polyester, Polyesterimide, Polyimide etc..

Class 200 Enameled Aluminum Magnet Wire
Performance Parameter:(The following parameters apply to 2.0mm Class 200 enameled round aluminum wire, the measured data for reference only.)
Breakdown Voltage: 10.2KV, 11.7KV, 11.0KV, 10.6KV
Elongation: 25%
Winding Test: 3D no cracking
Tensile Test: Tensing 15% insulation film no cracking
Resistance to heat shock: Tensing 15%, 220C insulation film no cracking
Resistance to solvent: Standard solvent ¡°2H¡± Pencil is ok
Nominal resistance: 0.00899¦¸/m

Brand Name: LP
Thermal Class: 130-220C
Delivery time: 7-30days
Conductor Type: Solid
Standard: IEC, NEMA,GB,JIS
Model Number: 23 awg magnet wire

Brand Name: LP
Size: 0.8mm-7.0mm
Delivery time: 7-30days
Thermal Class: 130-220C
Certification: UL,ISO,ROHS
Model Number: square magnet wire

High Temperature Round Polyimide Enameled Aluminum Wire normally include 200 class C, 220 Class C+, 240 Class HC with good performance double coating. And the enameled aluminum wire is dry type transformers, stator winding fractional and integral H.P motors, D.C Field and Armature windings, Motors for Hermetic grade, Hand tools, Chemicals Industries, Furnaces and high Torque, continuous rated, all Home appliances machine motors, Auto electrical, coil application-varnished or unvarnished.

China Supplier Wholesale Magnet Cable Coated Enameled Aluminum Wire Price

Enameled aluminum wire is a main type of winding wire. It consists of two parts: conductor and insulating layer. After bare wire is annealed and softened, it is baked and baked. The aluminum Wire is not insulated, and the surface of the enamelled aluminum wire has an insulating paint film that can be directly used.

Product Name:enameled aluminum round wire
Type: round wire
Round Dimension:Awg 33
Conductor Material:Aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ

Product Name:18 gauge enameled aluminum wire
Type: round and rectangular aluminum wire
Round Dimension:18 gauge
Conductor Material:aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ

AWG / SWG Rectangular / Flat Aluminum Enameled Winding Wire Widely used in microwave oven transformer, three-phase power transformer, rectifier, demagnetizing coil of large color screen TV, kitchen motors, magnetic mineral separation equipment, parts of spare for automotive, wires and cables, etc.

180H Rectangular Flat Aluminum Winding Wire For Electric Tools is a wire drawn from a round aluminum rod through a mold of specifications or extruded, and the drawn bare wire is annealed and softened, and then painted and baked for many times. Mainly used in the windings of electrical equipment such as transformers and reactors.

LP Industry does elongation test
2UEW PT-10 Class 180 Enameled round aluminum wire
the elongation is qualified about 24% -28% by IEC 60815.
Dimension: AWG12
Elongation is the ratio of the increase in length to the original length, expressed as a percentage. On an extensometer or tensile testing machine, stretch a straightened sample with a free test length of 200mm-250mm to the breaking point of the conductor at a rate of (5+1) mm/s, and calculate the linear increase in length at break and The ratio of the free test length is expressed as a percentage. Three samples are measured, the three test values are recorded, and the average value is taken as the elongation at break.

High Thermal Solderable polyester-imide Enameled Aluminum wire refers to the electrical round aluminum rod drawn by a certain specification die on the wire, according to customer requirements, with the required temperature index and compatibility insulating paint , Use mold type or felt type paint to paint multiple corresponding insulating paints. After baking treatment, the insulating paint and the wire form a whole.

High Quality Thin Insulated Solderable Enameled Aluminum Wire is used for Ttansformers, motors, and generators are all machines based on coils, which are devices that use large coils to generate magnetic fields and currents.

Production Description:
1. Specification of polyester film covered wire:
Round : 3mm-7mm;
Flat/Rectangular : a: 1mm-7mm, b: 2mm-20mm;
2. Insulation Materials:Cable/Telephone Paper, also called craft paper;
3. Temper Class: Non-impregnated Y (90¡ãC) impregnated A (105¡ãC);
4. Standard of polyester film covered wire : IEC, NEMA, GB;
5. Thickness of polyester film covered wire: According to customer¡¯s request;
6. Features of polyester film covered wire : Excellent voltage resistance properties;
7. Application of polyester film covered wire : Specially used in oil-immersed transformers and similar;

MOQ: 500kg
Size: 0.16-9.2mm
Delivery time: 7-30 Days
Thermal Class: 130C~220C
Brand Name: LP Magnet Wire
Application: transformer,motor,generator,modern instrument

Specifications of Polyester Film Wrapped Aluminum magnet Wires Strips
Specifications :
Has good heat resistance, conditions in 180¡ãC baking 24 hours performance unchanged;
High mechanical strength, good abrasion resistance and flexible;
Excellent withstand voltage properties;
Resistant to moisture absorption, moisture proof;
High breakdown voltage up to 5000~10000V (as required);
Compared to glass-fiber wound wire, lightweight specific gravity, thus reducing purchase cost;:
Has good heat resistance, conditions in 180¡ãC baking 24 hours performance unchanged;
High mechanical strength, good abrasion resistance and flexible;
Excellent withstand voltage properties;
Resistant to moisture absorption, moisture proof;
High breakdown voltage up to 5000~10000V (as required);
Compared to glass-fiber wound wire, lightweight specific gravity, thus reducing purchase cost;

The High Breakdown voltage Shaped Aluminum Wire Enameled includes a conductor and a radiation protection layer, the conductor is coated with an insulating layer, the insulating layer is wrapped with a polymethylpentene film, and the polymethylpentene film is wrapped with a corrosion-resistant layer. The anti-corrosion layer is wrapped with an anti-radiation layer, the anti-radiation layer is wrapped with an epoxy-modified silicone resin layer, and the epoxy-modified silicone resin layer is wrapped with an outer layer.

Temp Class: 155, 180
Standard: IEC,NEMA,GB,JIS
Resistivity: copper 20℃<=0.017241Ω(mm)^2/m Aluminum 20℃<=0.028000Ω(mm)^2/m Diameter range (mm): round: 3.0-7.0 Flat: a: 1-10 b: 3-35 Package: PT-25, PT-30,30kg/50kg/150kg wooden Spool according to customers requirements

Conductor Type: Solid
Thermal Class: 105℃
Brand Name: LP Magnet Wire
Certifaction: UL, SGS, RoHS, ISO9001
Diameter: Round:2.0-7.0;flat:a:1-10,b:3-35
Model Number: Flat paper covered winding wire
Main Application: Oil-immersed transformer windings