Hot sale Copper busbar of Lanpu product

5 method to choos the enameled copper wire, like price, voltage, stability and other performance, also can do an experiment to sure the characteristic.

Application: Power motors, hermetic groups, transformers, electro-brakes
CHARACTERISTICS
High temperature resistant
Excellent resistance to chemical agents
Very good winding ability
STANDAR PACKAGING
Reel (lost packaging):
DIN 200 – 12 Kg approximately up to ? 0.95 mm included
DIN 250 – 22 Kg approximately from ? 1 mm up to 2 mm inclusive
DIN 355 beyond
Other packaging on request

Thermal Class: 130-220C
Delivery time: 7-30 Days
Conductor Material: Copper
Standard: IEC,NEMA,GB,JIS
Brand Name: LP Magnet Wire
Bobbin: 30kg/50kgWooden Spool

High Thermal Class Motor Winding Awg 14 Enameled Copper Wire is a new type of electromagnetic wire that uses copper as the inner conductor. Its characteristics are between copper and aluminum, combining the excellent conductivity of copper and the light weight of aluminum. Copper enameled wire can be used for signal transmission, but it is prone to problems when used for power transmission, and the life of its products will be greatly reduced. In fact, in the use of copper enameled wire, pay attention to the oxidation protection of the cut surface of the lower enameled wire to ensure the effective combination of copper and aluminum, which can be used for a long time.

Insulated Nylon Coating Submersible Motor Copper Winding Wire
1.Nylon coated polyurethane enameled copper wire (UEW+NY),
2. Polyester enameled copper wire coated with nylon (PEW+NY),
3. Nylon hot melt enameled copper wire (NFW)
Used for motors and coils, relays, fractional horsepower motors, dry-type transformers and sealed coils.

Conductor Type: Solid
Conductor Material: Copper
Bobbin: PT-4–PT-200
Standard: IEC,NEMA,GB,JIS
Certification: SGS,UL,ISO9001,ISO4001
Product name: Enameled Copper Wire

Conductor Type: Solid
Conductor Material: Copper
Standard: IEC,NEMA,GB,JIS
Brand Name: LP Magnet Wire
Temperature class: 130,155,180,200,220

Product Name£º23 swg copper wire for motor re winding
Type: round type
Round Dimension:23 swg or 0.6mm
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.

EIW Polyesterimide Enamelled Copper Wire Characteristic:
High heat resistance and excellent chemical resistance
(1) Good film adhesion, heat resistance and chemical resistance
(2) Good insulation properties and dood thermostability under 150oC working environment, good resistance to abrasion and solvent

Product Name£ºcilling fan winding wire 36 swg copper
Type: round and rectangular copper wire
Round Dimension:36swg
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

The 130L thin paint film polyester enameled round copper wire (QZ-1/130) belongs to the enameled wire under the winding wire classification.

Model and name
QZ-1/130, 130L thin paint film polyester enamelled round copper wire.

Rectangular Bar
Width 9.53 mm. up to 305 mm.
Thickness 2.5 mm. up to 100 mm.
Volume Resistivity at 20°C/ 68°F 1.7241-1.7070 μΩcm
Volume Conductivity at 20°C/ 68°F 58.00-58.58 MS/m
Density 8.91 g/cm3
Melting Point 1083 °C
Excellent Corrosion Resistance

Conductor: Copper
Certificate: UL
Dimension: Thickness(a)/Width(b):0.45-6mm
Insulation Thickness: G1,G2 or single build, heavy build
Thermal Class: 120(Class E), 180(Class H), 200(Class C), 220(Class C+), 240(Class HC)
Packing:30kg-150kg ply-wood spool(250*400 / 250*500/ 250*600/ 250*730)

Product Name£º14 awg enameled copper wire
Type: round and rectangular copper wire
Round Dimension:14awg
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

Factory Price QA-1 155 0.3mm Enameled Coil Wire For Motor Winding is also called UEW copper winding wire is made by coating heat-resistant insulating varnish on the surface of copper conductors and baking and curing. The main component of the insulating paint film is heat-resistant polyurethane resin.

Introduction
The 130 grade thick paint film polyurethane enameled round copper wire (QB-2/130) belongs to the enameled wire under the winding wire classification.

Use characteristics
1. Under high frequency conditions, the dielectric loss tangent value is small.
2. It can be welded directly without scraping off the paint film.
3. Good colorability and can be made into enameled wires of different colors.

Copper Magnet Wire is composed of composition, conductive core and electrical insulation. Types Of Copper Magnet Wire is divided into UEW, EIW, PE and PETV according to electrical insulation materials. and copper enameled wire also divided into different types in accordance with its performance and insulation build, like ceramic wires and fiberglass covered wires.

Brand Name: LP Magnet Wire
Thermal Class: 130-220C
Standard: IEC,NEMA,GB,JIS
Bobbin: 30kg/50kgWooden Spool
Delivery time: 7-30 Days
Insulation: PEW, PIW, EIW, AIW, EI/AIW

Conductor Type: Solid
Standard: GB IEC JIS NEMA
Brand Name: LP Magnet Wire
Application: transformer,motor,generator
Thermal Class: 105 °C 120 °C 140 °C 155 °C 180 °C 200 °C 220 °C 240 °C

Enamelled Rectangular Copper Wire is one of magnet copper wire used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers.
Diameter: thickness: 1-10mm; width:1-22mm

How to check the Enameled Copper Wire
Check the color.
Pinch softness: the pure copper enameled wire has good ductility, if it is soft, it is pure copper enameled wire.
Check the packaging.

What is called Magnet Wire? The magnetic wire is a copper wire with an enamel (a kind of paint ) coating on it, and used for transformer coils and motor coils. Copper wire is a conductor, like bare copper.

Copper has been found to exhibit outstanding properties that include thermal and electrical conductivity. Multiple varieties of copper wire such as stranded, plated, coated or braided copper wire, which extensively used in non-electrical applications due to its aesthetic properties.

130 Degree 0.28 UEW Standard Enamelled Soldering Copper Wire is made of a grease insulating film with Polyester-thane resin as the main body by baking paint on the conductor; its biggest feature is that it can be directly soldered and the heat resistance class is 130¡ãC (Class B).

Product Name£ºawg 16enameled copper winding wire
Type: round and rectangular copper wire
Round Dimension:awg 16
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

Enamelled Copper Strip is one type of Magnet Wire used for making motors, inductors, speakers, transformers, electromagnets, hard disk head actuators and a host of other equipments which need tight insulated wire coils.

Copper Magnet Wire Manufacturing Process includes important three steps – enameling, winding and Inorganic insulated wires. Mainly introduce the method to ensure the quality of copper enameled wire.

Shape: Round
Brand Name: LP
Conductor Type: Solid
Delivery time: 7-30days
Size: 0.025mm-4.5mm
Thermal Class: 130-220C

Model
MYFE-4, a 4kV double-layer polyimide-fluorine 46 composite film wrapped round copper wire with a withstand voltage of 4kV.

Use characteristics
1. Excellent voltage resistance;
2. Excellent oil resistance;
3. Excellent high and low temperature resistance;
4. Excellent oil and water resistance under sealed conditions;
5. Excellent radiation resistance;
6. Excellent drag resistance.

There is ‘copperweld’ wire which is an iron core for more strength coated with copper for lower resistance than the iron. This is preferred for antennas for its strength. Purer copper wire will break more often, HOWEVER, I had a really pure (Oxygen free), bare copper wire up for about 5-6 years before it broke, and one with thick plastic insulation for 8-10 years, so it is hard to predict.