enameled aluminum wire

1)Product Name: Aluminum Enameled Wire
2)Diameter:0.5mm/1.0mm/1.5mm
3)Insulation Properties:Polyester imide enameled wire
4)Use:DIY,transformer,electromagnet
5)Work Temperature:-25¡æ~180¡æ
6)Work Humidity:5%~95%RH

awg to mm electrical enameled aluminum wire is one of the main types of winding wire, which is composed of a conductor and an insulating layer. After the bare wire is softened by annealing, it is painted and baked many times. However, it is not easy to produce products that not only meet the requirements of the standards, but also meet the requirements of customers. It is affected by the quality of raw materials, process parameters, production equipment, environment and other factors. Therefore, the quality characteristics of enameled aluminum wire and enameled copper wire are different. The same, but all have four major properties: mechanical properties, chemical properties, electrical properties, and thermal properties.

Enameled aluminum wire is a main type of winding wire. It consists of two parts: conductor and insulating layer. After bare wire is annealed and softened, it is baked and baked.
Enamelled aluminum wire has excellent high temperature resistance, mechanical properties, electrical and chemical properties and excellent freeze resistance. It is suitable for long-term work in 200 ¡ã C refrigeration equipment and chemically eroded electrical equipment, dry-type transformers, oil-immersed Transformer and epoxy casting transformers, iron remover, electromagnet and other mechanical and electrical equipment.

Aluminum is not only cheaper than copper, but also as an excellent conductor, it has better flexibility than copper, its density is only 1/3 of copper, and the same weight of aluminum conducts electricity twice as much as copper; therefore, aluminum Wire requires a larger wire gauge than copper wire to conduct the same current.
Compared with copper, another advantage of enameled round aluminum wire is that the NEMA standard recognizes aluminum wire as a higher thermal enameled wire. For example, replacing copper wires with aluminum wires, using high-temperature polyester TeresterR@ C966, and composite polyamide-imide topcoat, the thermal level can be increased from 200 to .220. The reason is that during the aging experiment of the enameled copper wire, the catalysis of copper ions promotes the aging of the paint film.

Class 200 enameled aluminum flat wire is a kind of winding wire that is coated with polyester-imide composite polyamide-imide insulating varnish on the surface of electrical aluminum wire as the conductor, and baked at high temperature. It has light weight. Easy to wind and relatively low cost, it is widely used in the windings of motors, UPS power supplies, intermittent power supplies and other products.

LP Industry does elongation test
2UEW PT-10 Class 180 Enameled round aluminum wire
the elongation is qualified about 24% -28% by IEC 60815.
Dimension: AWG12
Elongation is the ratio of the increase in length to the original length, expressed as a percentage. On an extensometer or tensile testing machine, stretch a straightened sample with a free test length of 200mm-250mm to the breaking point of the conductor at a rate of (5+1) mm/s, and calculate the linear increase in length at break and The ratio of the free test length is expressed as a percentage. Three samples are measured, the three test values are recorded, and the average value is taken as the elongation at break.

High Voltage Winding Wire Transformer Enameled Flat Aluminum Wire 2-22.5mm is a aluminum wire mainly used for windings with contiguous turns. Enamel is in fact a very resistant insulator mechanically, thermally and electrically. In addition to ordinary enamel there is solderable polyurethane enamel which is suitable for very large diameter wires (from 0.16 mm) very difficult to mechanically pickle. Pickling occurs around 400-500 ¡ã C.

Raw Materials: aluminum conductor and UEW(QA), PEW(QZ), EIW(QZXY), EI/AIW(QZY) Wire Enamel;
Thermal class: 180(Class H), 200(Class C), 220(Class C+), 240(Class HC),
Standard: IEC, NEMA, JIS, GB.
Spool materials: plastic, wooden.
Dimension: 0.16-9.2mm; 1awg – 34 awg
Application: used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers

Super Enameled Aluminium Wire Manufacturers Aluminium Wire Swg Chart, mainly aluminum rectangular wires with various thermal properties. These wires are available in different thermal classes, sizes and models.
Winding wires are state of the art. We achieve this through consistent, high-quality products that can be customized to meet specific needs. We use specially designed insulation coatings to ensure safety and reliability for all applications.

Raw Materials: aluminum conductor and UEW(QA), PEW(QZ), EIW(QZXY), EI/AIW(QZY) Wire Enamel;
Thermal class: 180(Class H), 200(Class C), 220(Class C+), 240(Class HC),
Standard: IEC, NEMA, JIS, GB.
Spool materials: plastic, wooden.
Dimension: 0.16-9.2mm; 1awg – 34 awg
Application: used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers

AWG / SWG Rectangular / Flat Aluminum Enameled Winding Wire Widely used in microwave oven transformer, three-phase power transformer, rectifier, demagnetizing coil of large color screen TV, kitchen motors, magnetic mineral separation equipment, parts of spare for automotive, wires and cables, etc.

180H Rectangular Flat Aluminum Winding Wire For Electric Tools is a wire drawn from a round aluminum rod through a mold of specifications or extruded, and the drawn bare wire is annealed and softened, and then painted and baked for many times. Mainly used in the windings of electrical equipment such as transformers and reactors.

Enameled aluminum wire is a main type of winding wire. It consists of two parts: conductor and insulating layer. After bare wire is annealed and softened, it is baked and baked. The aluminum Wire is not insulated, and the surface of the enamelled aluminum wire has an insulating paint film that can be directly used.

Enameled Aluminum Self Bonding Wire In Hot Air Or Alcohol Type: When the alcohol is added to the product, the wound coils are naturally bonded together and directly formed. Hot air self-adhesive is achieved by blowing hot air on the product coil during the coil winding process to achieve the self-adhesive effect. The temperature of the hot air varies according to different paint film, winding speed, wire diameter and other factors.

Magnet_wire, enameled wire, enameled wire or winding wire or insulated wire, is a bare copper wire or aluminum wire coated with a very thin layer of insulation or covered with paper or fiberglass or insulation films. What is magnet wire used for? Magnet wire is widely used in transformer, motor, welding machine,refrigeration compressor, solar power, electrical equipment, household, appliances, medical equipment and transportation, etc, which require tight coils of wire.

Advantage High Temperature 180 200 Degree Power Transformer Winding Aluminum Wire:
1. Compared with the copper enameled wire, enameled aluminum wire is easier to be winded, also there is a solid oxide film on the surface of enameled aluminum wire, which make it has a good insulating effect, a long life.
2. Due to the good insulating effect of aluminum film layer, it¡¯s heat-resistant temperature can be 20 degrees higher than that of the copper wire;
3. The greatest benefit of using aluminum is that it is 1/3 lighter than copper which significantly lower the production costs, secondly it can attach to the solids easily, and thirdly it can also reduce the freight and operation during transportation.

AWG Enameled Aluminum Winding Wire sometimes referred to as ¡°Winding Wire¡± is a copper or aluminum wire that is insulated with a thin film or coating and creates a magnetic field when the wire is would in a coil and power is applied. Magnet wire is used in transformers, generators and a long list of electrical components in almost anything with an electric motor.

China Manufacturers Enamelled Aluminum Electric Submersible Winding Wires is used in the manufacture of submersible motor windings. Submersible motors are mostly used for oil extraction in oil mines and work at high temperatures. In order to maintain the internal and external pressure balance, the interior including the windings are immersed in high-pressure (for example, 10 MPa) water-containing oil. In order to avoid joints, the windings are mostly made of a single magnet wire repeatedly wound in the slot of the motor, so the insulation layer is required to have good wear resistance. Usually polyimide film is used to wrap the covered wire.

ZhengZhou LP Industry CO.,Ltd is a professional Motor Winding Material Electrical Aluminum Wires Manufacturer, Mainly provide Aluminum /Copper Wire/foils
Dimension:0.2–10.0mm,
Rectangular: A> 0.8–8mm, B> 2-22.5mm
Square: 0.4*0.4mm–8*8mm
Foils:Thickness£º0.2–2.5mm, width:60–1250mm
Application: used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers

High Quality Thin Insulated Solderable Enameled Aluminum Wire is used for Ttansformers, motors, and generators are all machines based on coils, which are devices that use large coils to generate magnetic fields and currents.

UEW Standard Enamlled Aluminum Round Transformer Winding Wire is a main kind of winding wire. It consists of conductor and insulating layer. After annealing and softening, the bare wire is painted and baked many times. However, it is not easy to produce products that meet both standard requirements and customer requirements. It is affected by raw material quality, process parameters, production equipment, environment and other factors. Therefore, the quality characteristics of various enameled wires are different, but they all have four major properties: mechanical, chemical, electrical and thermal properties.

UL Qualified Oem Packing Enameled Aluminum Wire 0.7mm is a wire drawn or extruded from an oxygen-free copper rod or an electrical round aluminum rod through a certain specification die. Winding wire made of insulating varnish for many times. Mainly used in windings of transformers, motors, generators and various electrical equipment. Including 180 grade polyesterimide enameled flat aluminum wire, 200 grade polyamideimide enameled aluminum flat wire, 220 grade polyamide enameled flat aluminum wire.

Product Name£º18 Gauge Aluminum Winding Wire
Type: round and rectangular copper wire
Round Dimension:18 Gauge
Conductor Material£ºAluminum
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105, 120, 140, 155, 180, 200, 220, 240

Standard Size Range Round Type Enameled 0.50 mm Aluminum Wire is sometimes used in large transformers and motors, but due to its low conductivity, the cross-sectional area of aluminum enameled wire must be 1.6 times that of copper wire in order to obtain comparable DC resistance. Magnet wires with a smaller diameter usually have a circular cross-section. Thicker aluminum magnet wires are usually square or rectangular (with rounded corners) to allow more efficient use of the available winding space.

PT-25 PT-30 2.40mm Aluminum Enameled Transformer Winding Wire means that the one spool of winding wire is about 25kg or 30kg. Conical magnet wire delivery spool is made of plastic materials, used for below 5kg. The tapered design not only maximizes the winding volume of the spool, but also ensures the smooth winding process. But the 25kg and 30kg aluminum enameled transformer winding wire normally uses the wooden rool. All product data may have slight deviations, and the tolerance values ??are within the range of industry standards. The packaging and transportation process of the tapered magnet wire conveyor spool has the characteristics of high strength, strong impact resistance, and good balance.

Single-layer Enameled Aluminum Flat Wire Insulated Aluminium Winding Wires are suitable for all “H”, “F” and “B” category applications, such as dry-type transformers, stator winding fractional HP motors, DC magnetic field and armature windings. Wires coated with polyester have good chemical resistance and are compatible with all common impregnating varnishes, including high-temperature modified phenolic polyester and other varnishes that do not contain reactive solvents.

Model number: Q(ZY/X)-1/180, Q(ZY/X)-2/180 (2EIWN, 1EIWN)
Specification Grid: 0.100-3.000
Heat resistance level: 180 level
Implementation standard: GB/T 6109.12
Performance characteristics: can be used at a working temperature of 180. The product has excellent heat resistance, high thermal shock performance, small surface friction coefficient, and excellent mechanical properties.
Application area:Widely used in motors, electrical appliances, instruments, explosion-proof motors and marine motors with high heat-resistance levels, as well as horizontal windings for color tube deflection. Especially suitable for high-speed winding machine wire coils.

1) Acetal enameled wire (QQ) – E-class 120¡æ
2) Polyester enameled wire (QZ/130) – B grade 130¡æ
3) Modified polyester enameled wire (QZ/155) – F grade 155¡æ
4) Modified polyester imine enameled wire (QZY/180)-H class 180¡æ
5) Amide-imide enameled wire (QZY, QZY/200)-Class C 200¡æ
6) Polyimide enameled wire (QY/220) -C level 220¡æ

Polyester-Imide Series Enamelled Wirer For Oil-Transformer has the characteristics of high temperature resistance, good mechanical properties, excellent insulation properties and environmental sensitivity to meet the requirements of high-tech development in aerospace, microelectronics, electrical, chemical, energy technology and other high-tech developments.