AWG to mm electrical enameled aluminum wire

awg to mm electrical enameled aluminum wire is one of the main types of winding wire, which is composed of a conductor and an insulating layer. After the bare wire is softened by annealing, it is painted and baked many times. However, it is not easy to produce products that not only meet the requirements of the standards, but also meet the requirements of customers. It is affected by the quality of raw materials, process parameters, production equipment, environment and other factors. Therefore, the quality characteristics of enameled aluminum wire and enameled copper wire are different. The same, but all have four major properties: mechanical properties, chemical properties, electrical properties, and thermal properties.

Paper-covered Enameled Shaped Aluminum Wire deliver excellent performance when used with oil such as transformer oil. A paper with a small hygroscopicity, mechanical strength, good permeability for oil, and high dielectric strength should be selected.
Production Range :
1.Paper covered Flat Aluminum magnet wire
Thickness: 1mm–7mm
Width: 3.0–20mm
2.Paper covered Round Aluminum magnet wire
Diameter: 1.9mm–10.0mm
Standard : IEC,NEMA,GB, JIS;
Package : 30kg/50kg/150kg wooden spool or according to customers requirements;

Aluminum Magnet Wire can be divided into round aluminum wire and flat aluminum wire, also includes self-bonding aluminum wire and soldering aluminum wire. and aluminum magnet wire is widely usedfor transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers

Class 200 Enameled Aluminum Magnet Wire
Performance Parameter:(The following parameters apply to 2.0mm Class 200 enameled round aluminum wire, the measured data for reference only.)
Breakdown Voltage: 10.2KV, 11.7KV, 11.0KV, 10.6KV
Elongation: 25%
Winding Test: 3D no cracking
Tensile Test: Tensing 15% insulation film no cracking
Resistance to heat shock: Tensing 15%, 220C insulation film no cracking
Resistance to solvent: Standard solvent ¡°2H¡± Pencil is ok
Nominal resistance: 0.00899¦¸/m

ZhengZhou LP Industry CO.,Ltd is a professional Motor Winding Material Electrical Aluminum Wires Manufacturer, Mainly provide Aluminum /Copper Wire/foils
Dimension:0.2–10.0mm,
Rectangular: A> 0.8–8mm, B> 2-22.5mm
Square: 0.4*0.4mm–8*8mm
Foils:Thickness£º0.2–2.5mm, width:60–1250mm
Application: used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers

Standard Size Range Round Type Enameled 0.50 mm Aluminum Wire is sometimes used in large transformers and motors, but due to its low conductivity, the cross-sectional area of aluminum enameled wire must be 1.6 times that of copper wire in order to obtain comparable DC resistance. Magnet wires with a smaller diameter usually have a circular cross-section. Thicker aluminum magnet wires are usually square or rectangular (with rounded corners) to allow more efficient use of the available winding space.

Product Name£º130/155/180 Degree Aluminum Magnetic Wire
Type: round and rectangular type
Round Dimension:0.2–10.0mm,
Rectangular: A> 0.8–8mm, B> 2-22.5mm
Conductor Material£ºAluminum
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºPVF, EIW, AI-EIW, AIW, etc.
Thermal Class:130, 155, 180

Super Enameled Aluminium Wire Manufacturers Aluminium Wire Swg Chart, mainly aluminum rectangular wires with various thermal properties. These wires are available in different thermal classes, sizes and models.
Winding wires are state of the art. We achieve this through consistent, high-quality products that can be customized to meet specific needs. We use specially designed insulation coatings to ensure safety and reliability for all applications.

enameled aluminum wire is composed of aluminum conductor and insulation materials, which is insulated with a thin film or coating and creates a magnetic field when the wire is would in a coil and power is applied. Aluminum Conductor is main type of enameled wire.

This round enameled wire is made of pure aluminum with insulation,conductors with temperature Class B, F, H, 200˚C, 220˚C are being manufactured by us.
Diameter: 0.16mm to 8.0mm
Standard: IEC60317, NEMA MW 1000

LP Industry manufacture a broad assortment of Enameled Aluminium Wires, which is an aluminum conductor, commonly known as aluminium stranded conductor. Our range is manufactured using 99.5% pure electrolytically refined EC grade aluminium. We offer this corrosion resistance wire in varied specifications of diameters, mass, resistance, and breaking load.

AWG / SWG Rectangular / Flat Aluminum Enameled Winding Wire Widely used in microwave oven transformer, three-phase power transformer, rectifier, demagnetizing coil of large color screen TV, kitchen motors, magnetic mineral separation equipment, parts of spare for automotive, wires and cables, etc.

he High Thermal Polyurethane Enameled Aluminum wire produced by our company; the thermal grade is 155 and 180. High heat-resistant polyurethane enameled aluminum wire is characterized by direct solderability, good high frequency resistance, easy coloring, and good moisture resistance.

High Thermal Solderable polyester-imide Enameled Aluminum wire refers to the electrical round aluminum rod drawn by a certain specification die on the wire, according to customer requirements, with the required temperature index and compatibility insulating paint , Use mold type or felt type paint to paint multiple corresponding insulating paints. After baking treatment, the insulating paint and the wire form a whole.

Specifications of Polyester Film Wrapped Aluminum magnet Wires Strips
Specifications :
Has good heat resistance, conditions in 180¡ãC baking 24 hours performance unchanged;
High mechanical strength, good abrasion resistance and flexible;
Excellent withstand voltage properties;
Resistant to moisture absorption, moisture proof;
High breakdown voltage up to 5000~10000V (as required);
Compared to glass-fiber wound wire, lightweight specific gravity, thus reducing purchase cost;:
Has good heat resistance, conditions in 180¡ãC baking 24 hours performance unchanged;
High mechanical strength, good abrasion resistance and flexible;
Excellent withstand voltage properties;
Resistant to moisture absorption, moisture proof;
High breakdown voltage up to 5000~10000V (as required);
Compared to glass-fiber wound wire, lightweight specific gravity, thus reducing purchase cost;

Raw Materials: aluminum conductor and UEW(QA), PEW(QZ), EIW(QZXY), EI/AIW(QZY) Wire Enamel;
Thermal class: 180(Class H), 200(Class C), 220(Class C+), 240(Class HC),
Standard: IEC, NEMA, JIS, GB.
Spool materials: plastic, wooden.
Dimension: 0.16-9.2mm; 1awg – 34 awg
Application: used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers

Solderable Polyester Insulation Electric Motor Magnet Wire is widely used in electrical tools ballasts,automotive electronics,refrigerator and air conditioner compressor motors, television sets, eletric stove, microwave ovens, various transformers, and other kinds of electronic coil motors, electrical appliances.

LP Industry found from 1993, which has 30 years experience in producing all kinds of copper wire and aluminium wire. We have professional team on researching and devolopment, producing. ” Quality first” always is the last goal of our company.
Enameled aluminum wire is our advantages enameled winding wire for transformer, motor, generator, round type and flat type

EAL-Enameled Aluminum Wire is a main variety of the winding wire, composed by conductor and insulating layer. After the bare wires are annealed soften, then through many times paint, and bake to the finished product. Enameled wire is a main material for the electrical machine, electrical appliance, household applicance, ect. The different enameled wires have different qualities and characteristics, but all possess mechanical property, chemical property ,electrical property, febricity.

Enameled aluminum wire
Diameter: 0.8-8mm
Temperature Class : 180 , 200 , 220
Standard : IEC 60317-0-2 ,IEC 60317-29 , MW36-A
UL NO : E345303
Bobbin :150kg wooden spool , plastic spool .
Application : Transformer , generator , refrigeration system 

180H Rectangular Flat Aluminum Winding Wire For Electric Tools is a wire drawn from a round aluminum rod through a mold of specifications or extruded, and the drawn bare wire is annealed and softened, and then painted and baked for many times. Mainly used in the windings of electrical equipment such as transformers and reactors.

AWG Enameled Aluminum Winding Wire sometimes referred to as ¡°Winding Wire¡± is a copper or aluminum wire that is insulated with a thin film or coating and creates a magnetic field when the wire is would in a coil and power is applied. Magnet wire is used in transformers, generators and a long list of electrical components in almost anything with an electric motor.

Magnet wire, also known as winding wire, can be classified according to its basic structure, conductive core and electrical insulation layer. Generally, it is divided into enameled wire, winding wire, enameled winding wire and inorganic insulated wire according to the insulating material and manufacturing method used in the electrical insulating layer. 130 155 180 Degree 7 8 9 10 11 12 13 Awg Aluminum Magnet Wire is hot products made by LP Industry.

MOQ: 500kg
Size: 0.16-9.2mm
Conductor Type: Solid
Delivery time: 7-30 Days
Thermal Class: 130C~220C
Brand Name: LP Magnet Wire
Conductor Material: Aluminum

Product Name:18 gauge enameled aluminum wire
Type: round and rectangular aluminum wire
Round Dimension:18 gauge
Conductor Material:aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ

Modified Polyester Aluminum Wire Enamelled is a magnet wire made of electric round aluminum rod drawn or extruded into an aluminum wire with a certain specification die, and then coated with multiple layers of modified polyester on the aluminum wire. After the baking treatment, the insulating paint and the wire are formed as a whole.
The coated modified polyester greatly improves its temperature resistance.

UL Qualified Oem Packing Enameled Aluminum Wire 0.7mm is a wire drawn or extruded from an oxygen-free copper rod or an electrical round aluminum rod through a certain specification die. Winding wire made of insulating varnish for many times. Mainly used in windings of transformers, motors, generators and various electrical equipment. Including 180 grade polyesterimide enameled flat aluminum wire, 200 grade polyamideimide enameled aluminum flat wire, 220 grade polyamide enameled flat aluminum wire.

LP Industry is a professional magnet wire manufacturer in China, mainly poduce the round aluminum winding wire and flat aluminum enameled wire. Magnet Wires Manufacturing Process includes extruding wire in suitable size, cleaning wire, wire enamel insulating varnish and winding on spool.

Product Name:Solderable Self-Bonding Winding Wire
Type: flat or round wire
Round Dimension:0.14
Conductor Material:Aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ