Awg Insulated Round Copper Wire Enameled Magnet Wire For Motors

Factory Price QA-1 155 0.3mm Enameled Coil Wire For Motor Winding is also called UEW copper winding wire is made by coating heat-resistant insulating varnish on the surface of copper conductors and baking and curing. The main component of the insulating paint film is heat-resistant polyurethane resin.

Type: Insulated
Conductor Type: Solid
Delivery time: 7-30 Days
Thermal Class: 130-220C
Conductor Material: Copper
Brand Name: LP Magnet Wire
Certification: SGS,UL,ISO9001,ISO4001
Model Number: Insulated AWG 29 Coated Thin wire

The 130L thin paint film polyester enameled round copper wire (QZ-1/130) belongs to the enameled wire under the winding wire classification.

Model and name
QZ-1/130, 130L thin paint film polyester enamelled round copper wire.

Product Name£ºenamelled copper winding wire 2uew
Type: round and rectangular copper wire
Round Dimension: 2uew
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

Enamelled Copper Strip is one of enameled copper wire popularly referred to as a magnet wire which may be made from either copper or aluminum. This enamelled copper strip finds extensive use in building transformers, motors, inductors, hard disk actuators, speakers, electromagnets and various other applications which need tight insulated wire coils.

Raw Materials: aluminum conductor and UEW(QA), PEW(QZ), EIW(QZXY), EI/AIW(QZY) Wire Enamel;
Thermal class: 180(Class H), 200(Class C), 220(Class C+), 240(Class HC),
Standard: IEC, NEMA
Spool materials: plastic, wooden.
Packing:PT-4 plastic spool,carton case
Dimension: 0.16-9.2mm; 1awg – 34 awg
Application: used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers

Pin hole test is to find insulation defects after treatment with a salt water solution.
A wire specimen approximately 1,5 m in length is taken for conductors of nominal diameter less than 0,07 mm, and pproximately 6 m in length for conductors of nominal diameter equal to 0,07 mm or more.

Enamelled Square Magnet Wire – 0.4*0.4mm–9.1*9.1mm
Enamelled Flat Aluminum Wire – A> 0.8–10mm, B> 2-25mm
Enamelled Round Aluminum Wire – Diameter: 0.15–10.0mm,
Enamelled Flat Copper Wire – a: 0.3-8.0 mm, b：2-25.00 mm
Enamelled Round Copper Wire – Diameter: 0.016 -7.0mm

Thermal Class: 130-220c
Delivery time: 7-30 days
Centification: SGS,UL,RoHS,ISO9001
Standard: GB,IEC,NEMA,JIS
Brand Name: LP magnet wire
Bobbin: PT-4–PT-200

Shape: Round
Brand Name: LP
Conductor Type: Solid
Delivery time: 7-30days
Size: 0.025mm-4.5mm
Thermal Class: 130-220C

Insulated Nylon Coating Submersible Motor Copper Winding Wire
1.Nylon coated polyurethane enameled copper wire (UEW+NY),
2. Polyester enameled copper wire coated with nylon (PEW+NY),
3. Nylon hot melt enameled copper wire (NFW)
Used for motors and coils, relays, fractional horsepower motors, dry-type transformers and sealed coils.

Thermal Class: 130-220C
Delivery time: 7-30 Days
Conductor Material: Copper
Standard: IEC,NEMA,GB,JIS
Brand Name: LP Magnet Wire
Bobbin: 30kg/50kgWooden Spool

Temper: Soft(O), Hard(H)
Grades: Cu-ETP/ C-11000/ E-Cu58
Standard: ASTM, EN 13599, GB-T 18813-2002
Specification: Thickness: 0.1-4.0mm Width: 20-1500mm

Enamelled Copper Wire is useful for building transformers, motors, inductors, hard disk actuators, speakers, electromagnets etc. The enamelled copper wire is electrolytically-refined copper.

Bobbin: PT-4–PT-200
Conductor Material: Copper
Brand Name: LP Magnet Wire
Certification: SGS,UL,ISO9001,ISO4001
Temperature class: 130,155,180,200,220
Diameter: round:0.025-4.5mm;flat: a:1-10,b:3-16;square :a(b) 0.4-7mm

High Thermal Class Motor Winding Awg 14 Enameled Copper Wire is a new type of electromagnetic wire that uses copper as the inner conductor. Its characteristics are between copper and aluminum, combining the excellent conductivity of copper and the light weight of aluminum. Copper enameled wire can be used for signal transmission, but it is prone to problems when used for power transmission, and the life of its products will be greatly reduced. In fact, in the use of copper enameled wire, pay attention to the oxidation protection of the cut surface of the lower enameled wire to ensure the effective combination of copper and aluminum, which can be used for a long time.

New energy vehicles use a variety of electrical components, such as electric motors, batteries, and inverters, that require enameled copper wire.

Application: Power motors, hermetic groups, transformers, electro-brakes
CHARACTERISTICS
High temperature resistant
Excellent resistance to chemical agents
Very good winding ability
STANDAR PACKAGING
Reel (lost packaging):
DIN 200 – 12 Kg approximately up to ? 0.95 mm included
DIN 250 – 22 Kg approximately from ? 1 mm up to 2 mm inclusive
DIN 355 beyond
Other packaging on request

What is the enamelled copper wire? The enamelled copper wire is a wire which has been electrolytically refined; the layer is made from tough polymer materials. As these wires have coating on them they are also called magnet wires.

Product Name£º23 swg copper wire for motor winding
Type: round and rectangular copper wire
Round Dimension:23swg
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

Thermal Class: 130-220C
Delivery time: 7-30 Days
Brand Name: LP Magnet Wire
Diameter: 0.025mm–4.6mm
Certification: SGS,UL,ISO9001,ISO4001
Insulation: PEW, PIW, EIW, AIW, EI/AIW

Introduction
200-grade thick varnished polyester yam polyamide-imide composite enameled rectangular copper wire (Q(ZY/XY)B-2/200), which belongs to the enameled wire under the winding wire classification.

Model and name
Q(ZY/XY)B-2/200, 200-grade thick varnished polyester-polyamide-imide polyamide-imide composite enameled rectangular copper wire.

Introduction
The 130 grade thick paint film polyurethane enameled round copper wire (QB-2/130) belongs to the enameled wire under the winding wire classification.

Use characteristics
1. Under high frequency conditions, the dielectric loss tangent value is small.
2. It can be welded directly without scraping off the paint film.
3. Good colorability and can be made into enameled wires of different colors.

LP Industry is a professional magnet wire manufacturer in China, mainly poduce the round aluminum winding wire and flat aluminum enameled wire. Magnet Wires Manufacturing Process includes extruding wire in suitable size, cleaning wire, wire enamel insulating varnish and winding on spool.

130 Degree 0.28 UEW Standard Enamelled Soldering Copper Wire is made of a grease insulating film with Polyester-thane resin as the main body by baking paint on the conductor; its biggest feature is that it can be directly soldered and the heat resistance class is 130¡ãC (Class B).

Product Name£º12awg copper wire
Type: round type or rectangular type
Conductor Material£ºCopper
Enameled copper wire Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Elctric types: copper cable wire, welding wire, copper rod, copper strip, stranded copper wire etc.
Certificate£ºUL,RoHS

Rectangular Bar
Width 9.53 mm. up to 305 mm.
Thickness 2.5 mm. up to 100 mm.
Volume Resistivity at 20°C/ 68°F 1.7241-1.7070 μΩcm
Volume Conductivity at 20°C/ 68°F 58.00-58.58 MS/m
Density 8.91 g/cm3
Melting Point 1083 °C
Excellent Corrosion Resistance

enamelled copper wire specifications is different in different standards, like the 25 awg conversion to 0.455mm. LP Industry also produce the awg, swg, and GB magnet wire. We have the professional experts to design and guide the manufacturing process.
Round type: 0.016-7mm
Rectangular type: A> 0.8–8mm, B> 2-22mm

Copper Magnet Wire also called magnetic copper wire is used for Transformers, Inductors, Motors, Speakers, Hard disk head actuators, Potentiometers, Electromagnets, etc.
type: flat type and round type
Standard: IEC, NEMA, JIS, GB

Product Name£º23 swg copper wire for motor re winding
Type: round type
Round Dimension:23 swg or 0.6mm
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.