200 grade thick varnished polyester yam polyamide-imide compound enamelled rectangular copper wire

Product Name£º41 swg enamel copper wire
Type: round and rectangular copper wire
Round Dimension:41 swg
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

0.025-4.5mm Super Enameled Copper Wire In Phuket With Factory Price
Mechanical properties: including elongation, rebound angle, softness and adhesion, scratching, tensile strength and other items.
Heat resistance: including thermal shock and softening breakdown test.
Electrical properties include: breakdown voltage, paint film continuity and DC resistance test.
Chemical resistance includes solvent resistance and direct solderability.

5 method to choos the enameled copper wire, like price, voltage, stability and other performance, also can do an experiment to sure the characteristic.

The raw materials are pure copper cathodes grade “A” London Metal Exchange Registered Brand with copper purity of 99.99%. This allows our high quality copper busbar and rod to meet International Standards.
1.Volume Resistivity at 20°C/ 68°F 1.7241-1.7070 μΩcm
2.Volume Conductivity at 20°C/ 68°F 58.00-58.58 MS/m
3.Density 8.91 g/cm3
4.Melting Point 1083 °C
5.Excellent Corrosion Resistance

Product Name£º23 swg copper wire for motor re winding
Type: round type
Round Dimension:23 swg or 0.6mm
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.

There is ‘copperweld’ wire which is an iron core for more strength coated with copper for lower resistance than the iron. This is preferred for antennas for its strength. Purer copper wire will break more often, HOWEVER, I had a really pure (Oxygen free), bare copper wire up for about 5-6 years before it broke, and one with thick plastic insulation for 8-10 years, so it is hard to predict.

The 130L thin paint film polyester enameled round copper wire (QZ-1/130) belongs to the enameled wire under the winding wire classification.

Model and name
QZ-1/130, 130L thin paint film polyester enamelled round copper wire.

Introduction
The 130 grade thick paint film polyurethane enameled round copper wire (QB-2/130) belongs to the enameled wire under the winding wire classification.

Use characteristics
1. Under high frequency conditions, the dielectric loss tangent value is small.
2. It can be welded directly without scraping off the paint film.
3. Good colorability and can be made into enameled wires of different colors.

Conductor: Copper
Certificate: UL
Dimension: Thickness(a)/Width(b):0.45-6mm
Insulation Thickness: G1,G2 or single build, heavy build
Thermal Class: 120(Class E), 180(Class H), 200(Class C), 220(Class C+), 240(Class HC)
Packing:30kg-150kg ply-wood spool(250*400 / 250*500/ 250*600/ 250*730)

Conductor Type: Solid
Conductor Material: Copper
Bobbin: PT-4–PT-200
Standard: IEC,NEMA,GB,JIS
Certification: SGS,UL,ISO9001,ISO4001
Product name: Enameled Copper Wire

Standard: IEC,NEMA,GB,JIS
Packing: 30kg~150kg Poly-wooden spool (250*500/ 250*600
Application: Oil-immersed transformer windings; medium and large
Insulation Paper type: Kraft electrica paper / Nomex paper / HPI-Green / Mark paper.ect.

Product Name£ºsolid, h class enameled copper winding wire
Type: round and rectangular copper wire
Round Dimension:0.016–7.0mm
Rectangular: A> 0.8–8mm, B> 2-22.5mm
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.

Copper Magnet Wire Manufacturing Process includes important three steps – enameling, winding and Inorganic insulated wires. Mainly introduce the method to ensure the quality of copper enameled wire.

130 Degree 0.28 UEW Standard Enamelled Soldering Copper Wire is made of a grease insulating film with Polyester-thane resin as the main body by baking paint on the conductor; its biggest feature is that it can be directly soldered and the heat resistance class is 130¡ãC (Class B).

Special Copper Winding Magnet Wire Used For Automotive Sensors
Stranded enameled copper wire (LITZ)
Self-fusing enameled copper wire (R*-SB)
Polyester enameled copper wire with amide imide coating (FEAI)
Used for high-frequency coils, width coils, induction cooker coils, high-frequency power supplies, etc.

Introduction
200-grade thick varnished polyester yam polyamide-imide composite enameled rectangular copper wire (Q(ZY/XY)B-2/200), which belongs to the enameled wire under the winding wire classification.

Model and name
Q(ZY/XY)B-2/200, 200-grade thick varnished polyester-polyamide-imide polyamide-imide composite enameled rectangular copper wire.

Product Name£º23 swg copper wire for motor winding
Type: round and rectangular copper wire
Round Dimension:23swg
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC

Model
MYFE-4, a 4kV double-layer polyimide-fluorine 46 composite film wrapped round copper wire with a withstand voltage of 4kV.

Use characteristics
1. Excellent voltage resistance;
2. Excellent oil resistance;
3. Excellent high and low temperature resistance;
4. Excellent oil and water resistance under sealed conditions;
5. Excellent radiation resistance;
6. Excellent drag resistance.

Brand Name: LP Magnet Wire
Thermal Class: 130-220C
Standard: IEC,NEMA,GB,JIS
Bobbin: 30kg/50kgWooden Spool
Delivery time: 7-30 Days
Insulation: PEW, PIW, EIW, AIW, EI/AIW

Ultra Thin Enamel Copper Magnet Wire Insulated Winding Wire is an enameled wire with a guide body diameter of less than 0.05mm. In our company, it refers to the fine enameled wire produced by single-head or double-head enameling machine.
Specification range: 0.018-0.05mm
Varieties: UEW, EIW(S), EI/AIW, AIW, PIW, SBUEW
Thermal level: 130,155,180,200,220,240

Delivery time: 7-30 Days
Brand Name: LP Magnet Wire
Thermal Class: 130-220C
Standard: IEC,NEMA,GB,JIS
Bobbin: 30kg/50kgWooden Spool
Model Number: PE Insulated Enameled Copper Wire

Why is Enameled Copper Wire Widely Used? Most of equipment of our lives need the generator, transformer, mobile, computer, etc. All of the machine need the winding coil which need the copper magnet wire or aluminum enameled wire. So the enameled wire is important for life.

Thermal Class: 130-220C
Delivery time: 7-30 Days
Brand Name: LP Magnet Wire
Diameter: 0.025mm–4.6mm
Certification: SGS,UL,ISO9001,ISO4001
Insulation: PEW, PIW, EIW, AIW, EI/AIW

Conductor Type: Solid
Delivery time: 7days-30days
Brand Name: LP magnet wire
Standard: IEC, NEMA,GB,JIS
Certification: SGS,UL,ISO,ROHS
Size: a: 1-10mm b:3-35mm

Product Name£ºSwg Enamel Coated Copper Wire
Type: round and rectangular type
Round Dimension:5SWG – 44SWG
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºPVF, EIW, AI-EIW, AIW, etc.
Standards: IEC, NEMA, GB, JIS
Packing: PT15 PT-25 PT -30 PT-60 PT-200.
Spool: plastic spool or wooden spool

Application: Power motors, hermetic groups, transformers, electro-brakes
CHARACTERISTICS
High temperature resistant
Excellent resistance to chemical agents
Very good winding ability
STANDAR PACKAGING
Reel (lost packaging):
DIN 200 – 12 Kg approximately up to ? 0.95 mm included
DIN 250 – 22 Kg approximately from ? 1 mm up to 2 mm inclusive
DIN 355 beyond
Other packaging on request

Enamelled Square Magnet Wire – 0.4*0.4mm–9.1*9.1mm
Enamelled Flat Aluminum Wire – A> 0.8–10mm, B> 2-25mm
Enamelled Round Aluminum Wire – Diameter: 0.15–10.0mm,
Enamelled Flat Copper Wire – a: 0.3-8.0 mm, b：2-25.00 mm
Enamelled Round Copper Wire – Diameter: 0.016 -7.0mm

Enamelled Copper Strip is one of enameled copper wire popularly referred to as a magnet wire which may be made from either copper or aluminum. This enamelled copper strip finds extensive use in building transformers, motors, inductors, hard disk actuators, speakers, electromagnets and various other applications which need tight insulated wire coils.

Temper: Soft(O), Hard(H)
Grades: Cu-ETP/ C-11000/ E-Cu58
Standard: ASTM, EN 13599, GB-T 18813-2002
Specification: Thickness: 0.1-4.0mm Width: 20-1500mm

Conductor Type: Solid
Standard: GB IEC JIS NEMA
Brand Name: LP Magnet Wire
Application: transformer,motor,generator
Thermal Class: 105 °C 120 °C 140 °C 155 °C 180 °C 200 °C 220 °C 240 °C