0.5-1.5mm Aluminum Enameled Wire High Temperature Resistant Magnet Winding Wire

Brand Name: LP Industry
Width (mm): 20-1900
Standard: ISO9001
Alloy Or Not: Is Alloy
Processing Service: Bending, Welding, Cutting
Alloy No.: A1050,A1060, A1070,A1100,A1235,A1245

Polyester-Imide Series Enamelled Wirer For Oil-Transformer has the characteristics of high temperature resistance, good mechanical properties, excellent insulation properties and environmental sensitivity to meet the requirements of high-tech development in aerospace, microelectronics, electrical, chemical, energy technology and other high-tech developments.

awg to mm electrical enameled aluminum wire is one of the main types of winding wire, which is composed of a conductor and an insulating layer. After the bare wire is softened by annealing, it is painted and baked many times. However, it is not easy to produce products that not only meet the requirements of the standards, but also meet the requirements of customers. It is affected by the quality of raw materials, process parameters, production equipment, environment and other factors. Therefore, the quality characteristics of enameled aluminum wire and enameled copper wire are different. The same, but all have four major properties: mechanical properties, chemical properties, electrical properties, and thermal properties.

Faced with a large number of aluminum wire sales on the market, consumers are easy to choose blindly. They are too credulous about price and despise quality. In fact, it is not easy to choose a good aluminum wire. There are many factors to consider, so as to make the result more satisfactory. So, which one is good? How should I choose it? A quality factory is recommended here. The aluminum thread here sells credibility and quality.

Model number: Q(ZY/X)-1/180, Q(ZY/X)-2/180 (2EIWN, 1EIWN)
Specification Grid: 0.100-3.000
Heat resistance level: 180 level
Implementation standard: GB/T 6109.12
Performance characteristics: can be used at a working temperature of 180. The product has excellent heat resistance, high thermal shock performance, small surface friction coefficient, and excellent mechanical properties.
Application area:Widely used in motors, electrical appliances, instruments, explosion-proof motors and marine motors with high heat-resistance levels, as well as horizontal windings for color tube deflection. Especially suitable for high-speed winding machine wire coils.

Product Name:Solderable Self-Bonding Winding Wire
Type: flat or round wire
Round Dimension:0.16-9.2mm
Conductor Material:Aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ

Enameled rectangular wire is drawn from electrical round aluminum rod with certain specification mould. With mold type or blanket type, it is painted with compatible insulating coatings. After the product is baked, conductor and insulated coating make a whole. The product is widely applied in transformers, electric powers, electromotors, reactors and other similar electrical instruments.

LP Industry produce awg and swg 0.2-10.0mm round aluminum wire, used for transformer, generator, motor, submersible motors, etc. the aluminum winding wire is composed of aluminum conductor and inuslation materials.

Width: 20-1900mm
Tolerance: ±1%
Thickness (mm): 0.2-3.0
Standard: ISO9001
Alloy: Is Alloy
Delivery Time: 46-60 days
Brand Name: LP Industry

Enameled aluminum wire is a main type of winding wire. It consists of two parts: conductor and insulating layer. After bare wire is annealed and softened, it is baked and baked.
Enamelled aluminum wire has excellent high temperature resistance, mechanical properties, electrical and chemical properties and excellent freeze resistance. It is suitable for long-term work in 200 ¡ã C refrigeration equipment and chemically eroded electrical equipment, dry-type transformers, oil-immersed Transformer and epoxy casting transformers, iron remover, electromagnet and other mechanical and electrical equipment.

Performance comparison of High resistance metal enameled aluminum wire:
(1) Heat resistance
(2) Resistance to solvents, chemicals and varnishes
(3) Resistance to hydrolytic degradation
(4) Stability when combined with insulating materials
(5) Resistance to water and moisture
(6) Ease of use

Product Name£ºclass 155 enamelled aluminum winding wire 32swg
Type: round type
Dimension: 32swg class 155 temperature
Conductor Material£ºAluminum
Enameled copper wire Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.

LP Industry does elongation test
2UEW PT-10 Class 180 Enameled round aluminum wire
the elongation is qualified about 24% -28% by IEC 60815.
Dimension: AWG12
Elongation is the ratio of the increase in length to the original length, expressed as a percentage. On an extensometer or tensile testing machine, stretch a straightened sample with a free test length of 200mm-250mm to the breaking point of the conductor at a rate of (5+1) mm/s, and calculate the linear increase in length at break and The ratio of the free test length is expressed as a percentage. Three samples are measured, the three test values are recorded, and the average value is taken as the elongation at break.

1uew 2uew polyuretahne enameled aluminum winding wire is widely used in electrical tools ballasts,automotive electronics,refrigerator and air conditioner compressor motors, television sets, eletric stove, microwave ovens, various transformers, and other kinds of electronic coil motors, electrical appliances.

Specifications of Polyester Film Wrapped Aluminum magnet Wires Strips
Specifications :
Has good heat resistance, conditions in 180¡ãC baking 24 hours performance unchanged;
High mechanical strength, good abrasion resistance and flexible;
Excellent withstand voltage properties;
Resistant to moisture absorption, moisture proof;
High breakdown voltage up to 5000~10000V (as required);
Compared to glass-fiber wound wire, lightweight specific gravity, thus reducing purchase cost;:
Has good heat resistance, conditions in 180¡ãC baking 24 hours performance unchanged;
High mechanical strength, good abrasion resistance and flexible;
Excellent withstand voltage properties;
Resistant to moisture absorption, moisture proof;
High breakdown voltage up to 5000~10000V (as required);
Compared to glass-fiber wound wire, lightweight specific gravity, thus reducing purchase cost;

Production Description:
1. Specification of polyester film covered wire:
Round : 3mm-7mm;
Flat/Rectangular : a: 1mm-7mm, b: 2mm-20mm;
2. Insulation Materials:Cable/Telephone Paper, also called craft paper;
3. Temper Class: Non-impregnated Y (90¡ãC) impregnated A (105¡ãC);
4. Standard of polyester film covered wire : IEC, NEMA, GB;
5. Thickness of polyester film covered wire: According to customer¡¯s request;
6. Features of polyester film covered wire : Excellent voltage resistance properties;
7. Application of polyester film covered wire : Specially used in oil-immersed transformers and similar;

Available Diameter: 0.16mm–10mm
Available Diameter: AWG 1- AWG 34
Available Diameter: SWG 1- SWG 38
Thermal Class(℃）: 180 200 220 240
Insulation thickness: G1 G2 G3 G4
Standard: IEC NEMA JIS GB
Certificate: UL SGS
Insulation Brand: Elantas
Package: PT15 — PT270→carton box →Pallet/wooden case,
OR ply-wooden spools→Pallet/Wooden case

Enamelled round aluminum wire is mainly used as an electrical conductor wherever coils are in motion.It’s available size in diameters from 0.20mm to 9.2mm(SWG1-36,AWG1-32) with different insulation, such as Polyurethane, Polyester, Polyesterimide, Polyimide etc..

Two method to Distinguish High-quality Aluminium Magnet Wire, one is size, the other is looking the appearance.

LP industry wholesale enameled wire in china, mainly include the enameled alluminium winding wire and enameled copper wire.
Aluminum /Copper Wire/foils
Dimension:0.2–10.0mm,
Rectangular: A> 0.8–8mm, B> 2-22.5mm
Square: 0.4*0.4mm–8*8mm
Foils:Thickness£º0.2–2.5mm, width:60–1250mm

The enamelled round aluminum wire reach to production standards: IEC60317,NEMA MW1000/JIS C3202.
1. 120 degree round enamelled wire for oil-immersed transformer
2. 130, 155, 180 degree round enamelled wire are widely used in all kinds of magnet coil
3. 200 degree round enamelled wire works constantly in high temperature
4. 240 degree round enamelled wire for magnet coils of aviation, military and marine application

Product Name:18 gauge enameled aluminum wire
Type: round and rectangular aluminum wire
Round Dimension:18 gauge
Conductor Material:aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ

Enameled wire is widely used in winding wires of motors, transformers, inductors, generators, electromagnets, and coils.
In the past, the diameter range of enameled wire usually required was 0.2-2.0mm [AWG12-32], but nowadays, thinner (diameter less than 0.18mm, AWG33) and thicker (diameter greater than 3.0mm, AWG9) are required on the market Enameled wire.

Brand Name: LP
Thermal Class: 130-220C
Delivery time: 7-30days
Conductor Type: Solid
Standard: IEC, NEMA,GB,JIS
Model Number: 23 awg magnet wire

Width: 20-1900mm
Place of Origin: Henan, China
Brand Name: LP Industry
Thickness (mm): 0.2-3.0
Delivery Time: 46-60 days
Alloy No.: A1050,A1060, A1070,A1100,A1235,A1245

High Quality Thin Insulated Solderable Enameled Aluminum Wire is used for Ttansformers, motors, and generators are all machines based on coils, which are devices that use large coils to generate magnetic fields and currents.

Standard: IEC, NEMA,GB,JIS
Size: 0.8mm-7.0mm
Brand Name: LP
Thermal Class: 130-220C
Delivery time: 7days-30days

Class 200 Enameled Aluminum Magnet Wire
Performance Parameter:(The following parameters apply to 2.0mm Class 200 enameled round aluminum wire, the measured data for reference only.)
Breakdown Voltage: 10.2KV, 11.7KV, 11.0KV, 10.6KV
Elongation: 25%
Winding Test: 3D no cracking
Tensile Test: Tensing 15% insulation film no cracking
Resistance to heat shock: Tensing 15%, 220C insulation film no cracking
Resistance to solvent: Standard solvent ¡°2H¡± Pencil is ok
Nominal resistance: 0.00899¦¸/m

Standard range of dimensions (Aluminium):
cross-section(mm2) : 5 to 120;
width(mm) : 400 to 2000;
thickness(mm) : 200 to 600;
ratio w/t : < 10;